Connecting Strap Edge to a TV

Follow these steps to connect your Woojer Strap Edge to your TV. There are several options to connect the Woojer Strap Edge to your TV. You can choose between a wired connection with an aux cable, using the TV’s Bluetooth (if one exists), using an external Bluetooth transmitter, or using an HDMI audio extractor.

To connect your gaming console - please refer to this section on our support portal.

When using Bluetooth, remember that once the pairing process is completed, the Woojer Strap Edge will remain automatically be connected when turned on.

Important! Always set your TV volume to high/max, to ensure maximum effect. To control the headphones and sensation levels - use the Woojer Strap Edge's control buttons.

Using a 3.5mm cable connected to the TV

1. Press and hold the Woojer Strap Edge's power button for 2 seconds until the Woojer Strap Edge turns on.
2. Connect the provided 3.5mm aux cable - one end to the TV line-out jack and the other to the Woojer Strap Edge's audio input jack. The blue LED will appear constantly.
3. Connect your headphone to the Woojer Strap Edge's headphone jack.

Using TV integral Bluetooth connection

1. Enter pairing mode by pressing the Woojer Strap Edge's Power button for 5 seconds. The blue and red LEDs will blink alternately.
2. On your TV, enter pairing mode and locate Woojer Strap Edge.
3. Pair and connect the Woojer Strap Edge with your TV. The blue LED will illuminate constantly.
4. Connect your headphone to the Woojer Strap Edge's headphone jack.
   Note: If the TV's Bluetooth isn't a low-latency one, you may experience an audio delay. If that's the case, you should consider other types of connections.

Using an external low-latency Bluetooth transmitter

For this type of connection, you will need an external Bluetooth transmitter.

1. Connect the transmitter to your TV by using either a 3.5mm cable or by using a digital audio cable (S/PDIF)
2. Pair your Woojer Strap Edge with the Bluetooth transmitter: Enter pairing mode by pressing the Woojer Strap Edge's Power button for 5 seconds. The blue and red LEDs will blink alternately. Refer to the transmitter manual for detailed pairing information.
3. Connecting your headphones: You can connect wired headphones directly to your Woojer Strap Edge. Alternatively, if your Bluetooth transmitter is a dual-link one, you can pair both the Woojer Strap Edge and your Bluetooth headphones concurrently.
4. If your Bluetooth transmitter is a dual-link one, you can pair two Woojer Strap Edge units at the same time. In this case, connect each one of them to wired headphones.

Here are some examples of low-latency Bluetooth transmitters:
Avantree low-latency, dual-link Bluetooth transmitter, with S/PDIF input 
Auxiliary aptX low-latency transmitter (dual-link)

Using your TV Set-top box and an HDMI audio extractor

For this type of connection, you'll need an HDMI Audio Extractor.

1. Connect your set-top box HDMI output to an HDMI audio extractor, using an HDMI cable.
2. Connect the HDMI audio extractor to your TV, using an HDMI cable.
3. Connect your Woojer Strap Edge to the audio extractor, using a 3.5mm cable.
4. Connect your headphones to the Woojer Strap Edge's headphone jack.